Exclusive Distributor of:

Smooth On Graphic1


Metalset™ A4 Epoxy Adhesive

Aa1Metalset A4™ is a powerful epoxy adhesive that has been used for years by all branches of the U.S. Military as well as every major airline and auto manufacturer in the world. A4 is used for hundreds of industrial bonding applications and offers excellent adhesion to porous or non-porous surfaces. It can be applied to vertical surfaces without sagging and cures overnight with negligible shrinking.

Once cured, A4 offers good machining qualities (sanding, drilling, tapping), and resists alkalies, dilute acids and solvents. Applications include stopping leaks in pipes, valves and tanks (i.e. car gas tanks), bonding like and unlike surfaces, filling metal joints, dents, etc., anchoring bolts in wood, concrete, and repairing metal surfaces.

Single Box of 11-oz. tube set =
Metalset™ A4 Epoxy Adhesive

Super Instant™ Epoxy Adhesive

Aa2Smooth-On Super Instant Epoxy is a two component, clear adhesive designed to provide rapid bonding. When mixed in equal proportions – either by volume or by weight – curing takes place quickly enough to permit handling in 5 to 10 minutes at room temperature. Super Instant adheres to metals such as steel, aluminum and brass, to wood, glass, masonry and many hard plastics.

Single Box of 5-oz. tube set = Super Instant Epoxy Adhesive

MT-13™ Epoxy Adhesive

Aa3Smooth-On MT-13 is a premium performance epoxy for applications requiring maximum holding power and water resistance. MT-13 is a two component epoxy adhesive cement which is mixed in equal parts by volume (100A/123B by weight) and gels in a few hours. It develops handling strength in 16 hours and adheres extremely well to both porous and non-porous surfaces. MT-13 is widely used by the boating industry for assembly and general repair.

Single Box of 5.5-oz. tube set = MT-13™ Epoxy Adhesive

EA-40™ Epoxy Adhesive

EA-40 Clear Epoxy is an unfilled low-viscosity epoxy adhesive that can be spread easily in thin films that are almosts transparent after curing. EA-40 has a fairly long pot life and cures in 24 hours at room temperature to provide good mechanical and electrical properties. Mix ratio is 1:1 by volume. When mixed 2A:1B by volume, EA-40 will achieve greater heat resistance and improved physical properties.

EA-40 is versatile and can be used for many different assembly and repair applications ranging from electrical potting to jewelry assembly to repairing plumbing fixtures. Bow makers have come to know EA-40 as a tremendous laminating resin. EA-40 provides highly moisture resistant bonds meeting the performance requirements for Federal Specification MMM-A-188, Type III.

One Pint Kit = EA-40™ Epoxy Adhesive

PC-3™ Epoxy Adhesive

Smooth-On PC-3 Laboratory Table Top Cement is a two-component, black epoxy resin compound designed to join, bond and caulk sections of laboratory counters and tables. The epoxy resin cement is heavily filled…contains no volatile solvents…will adhere to vertical surfaces without sagging…and sets at room temperature with extremely low shrinkage. It is chemically stable and bonds strongly to natural and artificial stones, most metals, glass, wood and to thermosetting resins such as polyester, phenolic and epoxy. PC-3 is available in pint units (2.5 lbs.) or quart units (5.0 lbs.) and is sold in case quantities only. A case of pints contains six units and a case of quarts contains 3 units.

One Pint Kit = 1 Part A+B = 2.5 lbs. =

PC-3™ Epoxy Adhesive